Skip to content
Field note #006 MIGRATION 2 min read

Still running Siemens S5? Your migration options explained

Siemens S5 has been obsolete since 2005. The risks of staying on S5, the three realistic migration paths to S7 and TIA Portal, and how to plan a low-downtime change-over.

TTTechnotude Engineering Team Published

The SIMATIC S5 was the backbone of German-engineered automation for decades — and thousands of machines in India still run on it. But Siemens took S5 off the market long ago, and it has been obsolete since 2005. Many of these systems are now around 30 years old.

If your plant still depends on S5, this article explains the risks and your options.

Why staying on S5 is getting risky

  • Spare parts are scarce, often refurbished, and expensive — when you can find them at all.
  • Engineering tools for S5 run on legacy software and old PCs that are hard to keep alive.
  • Skills are disappearing. Fewer engineers can read and modify S5 programs.
  • Documentation is often missing, so even simple faults take longer to diagnose.

The real cost is not the part — it is the downtime while you look for it.

Option 1: Full migration to S7-1500 or S7-1200

The most future-proof route. The S5 hardware is replaced with a current controller — S7-1500 for larger machines and processes, S7-1200 for compact machines — engineered in TIA Portal.

  • S5 program logic is analysed, converted and largely re-engineered for the new platform, then fully documented.
  • Usually combined with a new HMI and, where needed, modern drives.
  • Best long-term value and the cleanest result.

This is exactly what we did on a 4Hi rewinder: S5 PLC and Emerson DC drives replaced with an S7-1200 and Siemens 6RA80 DC drives.

Option 2: Staged migration

When budget or shutdown time is limited, the migration can be split into stages — for example, controller and HMI first, drives in a later shutdown. Careful interface planning keeps the machine running between stages.

Option 3: Keep the I/O, replace the brain

Where field wiring is extensive and in good condition, the controller can be replaced while re-using existing I/O wiring through adapter solutions or carefully planned re-termination. This can significantly reduce installation time on site.

How to keep downtime low

  1. Survey first — inventory hardware, I/O, wiring and the actual running program.
  2. Engineer and test off-site — build the new panel and test the software against the survey before shutdown.
  3. Plan the change-over — a detailed step-by-step plan with a fallback.
  4. Commission and train — validate every function, then hand over documentation.

What does it cost?

It depends on machine size, I/O count, drives and documentation quality. But when the mechanics are sound, a retrofit is far more economical than a new machine — and avoids foundations, long lead times and operator retraining.

Book a free retrofit survey and we will tell you honestly which option suits your machine. Learn more about our retrofit & modernisation service.

  • #Siemens
  • #S5
  • #S7-1500
  • #S7-1200
  • #TIA Portal
  • #Retrofit

TT-99 Start a project

Got an obsolete PLC, a tired drive, or a new line to automate?

Start a work order. An engineer — not a call centre — reviews every enquiry and responds within one business day.

Technotude Automation

Work Order

WO-NEW

2026-11-19

03 · Requirement

Response within 1 business day