Skip to content
Field note #004 MIGRATION 3 min read

Migrating from SIMATIC S7-300/S7-400 to S7-1500 and TIA Portal: A Practical Guide

Why and how to migrate Siemens S7-300 and S7-400 PLCs to S7-1500 and TIA Portal — preparation, the migration process step by step, and what to do afterwards.

TTTechnotude Engineering Team Published Updated

With the SIMATIC S7-300 now in its phase-out, many plants are asking the same question: when and how should we move to S7-1500? This guide walks through the reasons to migrate, how to prepare, and the migration process we follow on real projects.

Why move to S7-1500 and TIA Portal?

The S7-1500 and the TIA Portal engineering environment are Siemens’ current platform for PLC automation. Compared with S7-300/400 and STEP 7 Classic, they offer:

  • Higher performance — faster processing for demanding machine and process applications.
  • One integrated engineering environment — PLC, HMI, drives and networks configured in a single TIA Portal project.
  • Integrated diagnostics — system diagnostics are displayed on the CPU, in TIA Portal and on the HMI without extra programming.
  • Integrated security — know-how protection, copy protection and access levels built in.
  • Integrated technology — motion control, PID and trace functions available out of the box.
  • Long-term support — staying on the current platform protects you from rising spare-part prices and shrinking support for older hardware.

Before you start: preparation

A successful migration is mostly decided before any hardware is changed.

  1. Document the existing system. Record every CPU, I/O module, communication processor and network, plus all connected devices — drives, HMIs, remote I/O and third-party equipment.
  2. Collect and back up the software. Upload the running program from every PLC, archive the STEP 7 projects, libraries and HMI projects, and keep a restorable backup of the original state.
  3. Check what you really have. The program on the CPU and the project on the laptop are often not the same. Compare them before you migrate anything.
  4. Write a migration plan. Define the scope, the shutdown window, responsibilities, test criteria and a fallback plan in case something goes wrong on site.

The migration process

  1. Set up the engineering workstation with the current TIA Portal version and the required options and licences.
  2. Migrate the STEP 7 Classic project into TIA Portal using the built-in migration function, then change the hardware configuration to the new S7-1500 CPU and I/O.
  3. Review and adapt the program. Migrated code compiles, but it rarely takes full advantage of the new platform. Instructions, addressing, timers, communication blocks and system functions often need attention.
  4. Re-engineer the HMI where needed — older panels may need to move to current Comfort or Unified panels.
  5. Simulate and test offline using PLCSIM and a structured test plan before going to site.
  6. Install and commission during the planned shutdown, keeping existing field wiring wherever possible.
  7. Validate, train and document. Prove every function against the test plan, train operators and maintenance staff, and hand over updated drawings and backups.

Tip: wherever possible, build and test the new panel in parallel so the site shutdown is used for change-over, not debugging.

After the migration

  • Keep firmware and TIA Portal versions up to date and documented.
  • Schedule regular backups of PLC, HMI and drive parameters.
  • Collect feedback from operators and maintenance — the first weeks after a migration are the best time to fine-tune alarms and screens.

Need help?

Technotude has migrated legacy Siemens systems — from S5 through S7-300/400 — to current platforms on running machines. Talk to our engineers about your S7-300 or S7-400 migration, or read about our retrofit approach.

  • #Siemens
  • #S7-300
  • #S7-400
  • #S7-1500
  • #TIA Portal

TT-99 Start a project

Got an obsolete PLC, a tired drive, or a new line to automate?

Start a work order. An engineer — not a call centre — reviews every enquiry and responds within one business day.

Technotude Automation

Work Order

WO-NEW

2026-11-19

03 · Requirement

Response within 1 business day