Skip to content
Field note #005 DRIVES 2 min read

DC to AC drive conversion: when does it make sense?

Converting DC drives to AC can save 40–50% in energy. How AC vector drives match DC performance, when to convert, and when to upgrade the DC drive instead.

TTTechnotude Engineering Team Published

For decades, DC drives were the only practical choice for applications that needed precise speed and torque control — winders, rolling mills, extruders, cranes. Many of those systems are still running today. But AC drive technology has caught up, and in most cases overtaken it.

Why AC drives replaced DC in most applications

Modern AC variable speed drives were developed specifically to emulate DC performance — dynamic torque response, vector control and speed accuracy — while keeping the advantages of the standard AC induction motor:

  • No brushes or commutator — far less motor maintenance.
  • Robust, widely available motors — standard frames, easy to source.
  • Higher efficiency across the speed range.
  • Modern diagnostics and communication for integration with PLC and SCADA.

Because of this, AC drives are now used in applications that were once dominated by DC.

The energy case

When converting from DC to AC technology, you can typically expect to save 40–50% in energy consumption, along with lower maintenance costs. On machines that run around the clock, the payback can be fast.

When should you convert to AC?

Converting the motor and drive to AC is usually the best choice when:

  • the DC motor is near the end of its life, or needs frequent brush and commutator maintenance;
  • spares for the existing DC drive are scarce or expensive;
  • energy costs are a significant part of operating cost;
  • you are already modernising the control system and want a single, current platform.

When should you keep DC?

Sometimes keeping DC makes sense. If the DC motors are healthy and the mechanical arrangement makes motor replacement difficult, upgrading only the DC converter to a current model — such as the Siemens SINAMICS DC Master 6RA80 — restores reliability and support at lower cost.

That is the approach we took on a 4Hi rewinder retrofit, where the DC motors stayed and old Emerson DC drives were replaced with Siemens 6RA80 units.

What a conversion involves

  1. Survey of motors, loads, duty cycles and the existing drive line-up.
  2. Sizing of new AC motors and drives — including multi-motor line-ups with common DC bus where relevant.
  3. Panel engineering and integration with the machine’s PLC.
  4. Commissioning and tuning — motor identification, speed and torque loop optimisation, tension control.

Not sure which way to go?

We assess both options on site and recommend what makes economic sense for your machine. Read more about our VFD & DC drive services or contact our team.

  • #DC drives
  • #VFD
  • #AC drives
  • #Energy saving
  • #Siemens 6RA80

TT-99 Start a project

Got an obsolete PLC, a tired drive, or a new line to automate?

Start a work order. An engineer — not a call centre — reviews every enquiry and responds within one business day.

Technotude Automation

Work Order

WO-NEW

2026-11-19

03 · Requirement

Response within 1 business day